I'm just starting to make a small coffee / side table from some lovely English Walnut. After trimming and flattening the board ended up 42" x 16" x 1 1/2" thick. There were knots and cracks on both sides which I filled and stabilised with a fair amount of Epoxy resin.
The shot below shows the first flood coat of oil which shows the beauty of this fine board. It would be nice to continue the hand rubbed oil finish but the epoxy will stand out as a shiny patch. So it will be finished with three coats of matt Osmo Hardwax oil which will build up and harmonise the sheen as well as providing good protection.
0 Response to "Wonderful English Walnut"
Okomentovat